Burrton, KS Noise Levels
Noise levels in Burrton, KS
BTS only publishes Burrton, KS in the 70-79.9 dB(A) band, which straddles HUD's own dividing line: depending on exactly where in that range the true 24-hour average falls, this reads as "Normally Unacceptable" (65-75 dB(A)) or "Unacceptable" (above 75 dB(A)) under 24 CFR 51.104. The main source is rail traffic, well ahead of the other two modes BTS tracks. This describes Burrton as a whole, not a specific block, the underlying BTS map resolves to about 38 meters per pixel, sampled at the town's own center point.
Where Burrton's noise comes from
BTS models these three sources separately before combining them, so a place can be quiet on two and loud on the third.
If you're weighing a move to Burrton
That also clears FHWA's own 66 dB(A) impact threshold for residential land use (23 CFR 772, Table 1), the level highway agencies use to decide whether a new road needs a sound wall. The same window and door upgrades that work on road noise also cut broadband rail noise, though very low-frequency freight rumble travels through walls, not just glass.
How Burrton compares nationally
Burrton ranks 65 of 3,622 measured places nationally, 1 being the loudest this dataset covers. Population is about 846, 10,979th largest of the 12,137 places covered here.
Checking one address in Burrton
Burrton's figure above is a town-wide reading. For one exact address, BTS's own map is the free, authoritative source.
Where Burrton's figures come from
Every dB(A) figure on this page traces to a named BTS dataset, documented in the methodology guide. The guide to what actually cuts each kind of noise explains why rail traffic calls for a different fix than the other two sources.