NoiseLevelCheck

Sherman, IL Noise Levels

Is Sherman, IL noisy?

Acceptable
52.5dB(A)

Sherman, IL reads 52.5 dB(A) on BTS's 24-hour average, inside HUD's "Acceptable" noise zone, 65 dB(A) day-night average or below under 24 CFR 51.104, the federal government's own line for building housing with no extra sound attenuation required. Rail traffic drives that number here, not the other two sources.

This describes Sherman as a whole, not a specific block, the underlying BTS map resolves to about 38 meters per pixel, sampled at the town's own center point.

Sherman's noise, by source

n/aRoad
52.5 dBRail
n/aAviation

Each of the three transportation modes gets its own model from BTS; the combined figure above is what they add up to.

What this means for a house here

The same window and door upgrades that work on road noise also cut broadband rail noise, though very low-frequency freight rumble travels through walls, not just glass.

Where Sherman ranks

Among the 3,622 US places in this dataset with any measurable transportation noise, Sherman ranks 1,229, loudest first. Population is about 4,634, 5,094th largest of the 12,137 places covered here.

Your street may differ from Sherman's reading

This page describes Sherman as a whole. If one specific address is what matters, BTS publishes the same underlying map for free.

Check one address in Sherman on BTS's own map

Behind Sherman's reading

The methodology guide shows exactly how Sherman's reading was built from BTS's tile data. Since rail traffic is what's driving this reading, the guide to what actually cuts each kind of noise covers the fix that fits.