NoiseLevelCheck

Zeigler, IL Noise Levels

Is Zeigler, IL noisy?

Zeigler, IL's 60-69.9 dB(A) band spans one of HUD's zone boundaries, so the honest answer is a range: somewhere between "Acceptable" (65 dB(A) or below) and "Normally Unacceptable" (65-75 dB(A)), not one clean verdict. Rail traffic drives that number here, not the other two sources. This describes Zeigler as a whole, not a specific block, the underlying BTS map resolves to about 38 meters per pixel, sampled at the town's own center point.

Zeigler's noise, by source

n/aRoad
65 dBRail
n/aAviation

Each of the three transportation modes gets its own model from BTS; the combined figure above is what they add up to.

What this means for a house here

Depending on where in that band the true value sits, it may also clear FHWA's 66 dB(A) residential impact threshold (23 CFR 772, Table 1), the trigger highway agencies use for sound-wall decisions. The same window and door upgrades that work on road noise also cut broadband rail noise, though very low-frequency freight rumble travels through walls, not just glass.

Where Zeigler ranks

Among the 3,622 US places in this dataset with any measurable transportation noise, Zeigler ranks 264, loudest first. About 1,465 people live there, making it the 8,813th largest place in this dataset.

Your street may differ from Zeigler's reading

This page describes Zeigler as a whole. If one specific address is what matters, BTS publishes the same underlying map for free.

Check one address in Zeigler on BTS's own map

Behind Zeigler's reading

The methodology guide shows exactly how Zeigler's reading was built from BTS's tile data. Since rail traffic is what's driving this reading, the guide to what actually cuts each kind of noise covers the fix that fits.